EGW Dovetail Sight Mount For the DeltaPoint Pro (fits Bushnell RXS-250/100, Shield RMS/RMSc/SMS & more) for Universal .670" Radius
Mounting Hardware is Included
- 6-48 X .313" Overall Length
- 8-40 X .313" Overall Length
- 8-40 X .335" Overall Length
For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.
This mount has a bottom radius of .670". There should be a slight gapat the top of the radius between the receiver and the mount whenmounted. The two spreads on this mount measure .500"-.505" and .8625"which should fit the receiver ring on the following guns:
Common Applications:
Shotgun:
- Benelli Auto / Super Black Eagle / Vinchi, M4, M2 (Will Work in the Front Set Only, 8-40 Screws)
- Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws)
- Browning A-Bolt 12 Gauge
- Franchi Affinity
- Mossberg 500, 590, 835, 930, 935 Pre ’97
- Mossberg 500, 590, 835, 930, 935 Late (after ’97) (Requires 8-40 and Longer Screws)
- Remington 870
- Remington 1100
- Remington 1187
- Savage 210
- Savage 212
- Savage 220
- Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws)
- Winchester 1300Winchester SXP
Rifle:
- Remington 700, 722, 40x
- Remington 783
- Remington 710/770
- Remington xp 100
- Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws)
- Savage Arms Centerfire Models
- Winchester 70
Red Dot Fitment:
- Bushnell RXS-100
- Bushnell RXS-250
- Bushnell RXU-200
- Crimson Trace CTS-1500
- Holosun 407K
- Holosun 507K
- Holosun EPS Carry
- Jpoint
- Leupold DeltaPoint Pro
- Optima
- Redfield Accelerator
- Shield RMS
- Shield RMSc
- Shield SMS
- Sig Romeo Zero
- Vortex Defender-CCW
- Vortex Defender-ST
- Vortex Defender-XL
(with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K to fit.)
EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.
Installation Instructions
– Remove the rear sight
– Install the EGW Sight Mount
– Tighten set screw (if applicable)
– Place the red dot sight on the EGW Sight Mount
(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
– Apply blue Loctite to the provided mounting screws
– Torque mounting screws to 15in/lbs
Modification of your firearm may nullify the manufacturer’s warranty.
This product should be installed and checked by a qualified gunsmith.
No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Alt Description:
- Mossberg 500 Red Dot Mount
- Mossberg 590 Red Dot Mount
- Mossberg 930 Red Dot Mount
- Benelli Super Black Eagle Red Dot Mount
- Benelli Vinchi Red Dot Mount
- Benelli M2 Red Dot Mount
- Benelli M4 Red Dot Mount
- Benelli Supernova Red Dot Mount
- Franchi Affinity Red Dot Mount
- Savage 220 Red Dot Mount
- Stoeger M3000 Red Dot Mount
- Stoeger M3500 Red Dot Mount
- Winchester 1200 Red Dot Mount
- Winchester 1300 Red Dot Mount
- Winchester 1400 Red Dot Mount
- Winchester SXP Red Dot Mount
- Winchester Model 70 Red Dot Mount
- Remington 700 Red Dot Mount
- Remington 870 Red Dot Mount
- Mossberg 500 DeltaPoint Pro Mount
- Mossberg 590 DeltaPoint ProMount
- Mossberg 930 DeltaPoint Pro Mount
- Benelli Super Black Eagle DeltaPoint Pro Mount
- Benelli Vinchi DeltaPoint Pro Mount
- Benelli M2 DeltaPoint Pro Mount
- Benelli Supernova DeltaPoint Pro Mount
- Franchi Affinity DeltaPoint Pro Mount
- Savage 220 DeltaPoint Pro Mount
- Stoeger M3000 DeltaPoint Pro Mount
- Stoeger M3500 DeltaPoint Pro Mount
- Winchester 1200 DeltaPoint Pro Mount
- Winchester 1300 DeltaPoint Pro Mount
- Winchester 1400 DeltaPoint Pro Mount
- Winchester SXP DeltaPoint Pro Mount
- Remington 700 DeltaPoint Pro Mount
- Winchester 70 DeltaPoint Pro Mount
The distinction between inferior quality and premium scope mountis undeniable. At MSP, we only offerred dot mountsfrom the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.